A suitable froth pump manufacturer should connect its proposed 2QV-AF configuration to your slurry condition, duty point, lining choice, and plant layout. Use the model’s operating range and integration details to compare supplier responses before you request a quotation.

A suitable froth pump manufacturer should explain how its proposed pump matches your slurry, duty point, lining, and plant arrangement. Our 2QV-AF froth pump is intended for abrasive and corrosive froth slurry in metallurgy, coal, and chemical processing, so the supplier discussion should begin with those working conditions.
Ask the manufacturer to identify the proposed pump model and connect it to your process conditions. The 2QV-AF is a vertical-tank froth pump for conveying abrasive or corrosive froth slurry. Its tangent entrance is designed for froth elimination, and an overflow nozzle returns excess material to the tank.
This makes the model relevant to a line where froth handling and a vertical tank arrangement are part of the process. Compare each supplier response against your tank position, material entry route, overflow arrangement, and available maintenance access. A supplier response that does not address these points leaves the integration decision unresolved.
Compare manufacturers using the same capacity, head, slurry, lining, connection, transmission, and layout details. Choose the 2QV-AF when the duty is 6-43 m3/h and 6-30 m head, the line suits its 100 mm inlet and 50 mm outlet, and the plant can accommodate its vertical-tank arrangement. Ask the supplier to connect the lining and transmission proposal to your process conditions.
A manufacturer should state whether its proposed configuration fits your required capacity and head. For the 2QV-AF, the listed range is 6-43 m3/h capacity and 6-30 m head, with a speed range of 800-1800 r/min.
| Parameter | 2QV-AF value |
|---|---|
| Power | 3 KW |
| Capacity | 6-43 m3/h |
| Head | 6-30 m |
| Speed | 800-1800 r/min |
| Efficiency | 45% |
| Inlet diameter | 100 mm |
| Outlet diameter | 50 mm |
Send the required flow, head, speed, and mating pipe dimensions to each manufacturer. The 2QV-AF has a 100 mm inlet and a 50 mm outlet, so your comparison should include how the proposed connections fit the existing line. Choose this model when your duty falls within the stated capacity and head ranges and the connection sizes suit the plant.
The supplier’s material recommendation should follow your slurry chemistry and abrasion conditions. The 2QV-AF has a double casing structure, and its pump head can use metal, rubber, or other non-metallic linings. Listed choices include High Chrome, Natural Rubber, and polyurethane.
Provide the slurry chemistry and abrasion conditions in the same request sent to each manufacturer. Then compare the proposed lining, the reason for that choice, and the wear parts included in the configuration. This check helps distinguish a pump proposal built around your process from a response that only repeats a standard model name.
A suitable supplier should address the transmission arrangement alongside the operating load and available space. The 2QV-AF can use motor seats or electrode frames for direct transmission, or adjustable belt speeds for changing operating loads. It is also compatible with SP and SPR series transmission components.
Include the available drive space, required speed, and any existing SP or SPR components in your supplier inquiry. Compare how each proposed arrangement fits the line, tank position, pipe route, and maintenance access. The vertical-tank structure means the pump footprint and surrounding working space belong in the manufacturer evaluation.
The 2QV-AF uses interchangeable parts, including volute liners and impellers. Its double casing separates the casing from the lining choice, allowing the pump head material to be matched to different slurry conditions.
Ask each supplier to identify the replaceable wear parts in the proposed configuration and how the lining choice relates to your abrasive or corrosive slurry. A supplier response is easier to compare when it covers the model, duty point, lining, connections, transmission, and maintenance access in one technical submission.
What to weigh
Process fit · froth slurry, vertical tank, and tangent entrance
Duty match · capacity, head, speed, and connection sizes
Lining recommendation · chemistry, abrasion, and wear-part selection
Integration check · transmission, tank position, and maintenance access
Your shortlist
2QV-AF froth pump · abrasive or corrosive froth slurry in metallurgy, coal, and chemical processing
Send every froth pump manufacturer the same operating information: required capacity and head, slurry chemistry, abrasion conditions, tank position, inlet and outlet dimensions, transmission preference, and maintenance-space limits. Then compare the technical response against the 2QV-AF range and layout requirements.
For a closer product review, see our 2QV-AF froth pump and include these process details in your inquiry.

About the author
Qualityslurrypump Editorial Team
The company
CNSME is a professional Slurry Pump supplier in China. We are engaged in the manufacturing and producing of heavy duty and severe duty slurry pumps and spare parts. Being manufactured at the highest standards, our pumps can guarantee longer life, higher performance, easier operation and maintenance. They are widely used in mining, mineral processing, tailings disposal, dredging, construction, metallurgy, power plants, sewage water treatment, as well as chemical and petroleum industry.…
About Us ↗Visit company website ↗Feb 09,26
Expert OEM Froth Pump Manufacturer Guide for Optimal Performance
Choosing the right OEM froth pump manufacturer is crucial for efficient and reliable operations in various industries, including mining, chemical processing, and wastewater treatment.
Mar 16,26
Slurry Pump Solutions For Mineral Processing
Jun 26,26
Engineered for Extreme Slurry Metallurgy Plants
Oct 31,25
Slurry pump application field feedback
Feb 02,26
Quality Slurry Pump Leading China Dredge Pump Manufacturer for Global Projects
Quality Slurry Pump offers a comprehensive range of durable and efficient pumps designed for various dredging applications worldwide
Oct 31,25
Professional Slurry Pump Supplier from China
We are a professional slurry pump supplier based in Shijiazhuang, China, wither over a decade's experience.
bscribe newslette
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.
